Water Heater Repair – Common Problems With Water Heaters
Water heaters are one of the most under-appreciated appliances in your home. They provide you with hot water all day every day and usually need little to no maintenance at all.
However, they do break down and need to be repaired from time to time. Here are some signs that you need to call for Water Heater Repair Spring TX right away:
Leaking Tubes
The tubes that connect to and from your water heater are a common source of leaks. This is especially true for the dip tube, which stretches from the water supply inlet at the top of the tank down to the bottom where it carries cold water in order to heat it. When the dip tube starts to fail, it will often produce a noticeable leak near the water heater in your home.
Leaking tubes can also be the result of corroded fittings, which are best left to a professional to inspect and replace. You can check the fit of these connections by attempting to tighten them with a pipe wrench, but if they are corroded, you will need to replace the tubes altogether.
Other possible leak sources include the temperature and pressure relief valve. These are put under a lot of strain in order to relieve excess pressure in the tank, so it’s important that their seal doesn’t degrade over time. If the seal wears out, it could cause your water heater to explode, so you should test its functionality regularly.
You should also check the plumbing pipes above your water heater. If you notice that any of them are leaking, you will want to turn off the water supply valve nearest the leak, which may be located on a pipe right before or above your water heater and will likely have a red handle. This should be turned off by turning it clockwise or, if it’s a lever, pulling the handle down.
If you still notice a leak, it’s best to contact a plumber. The plumber will need to shut off the gas and power to your water heater in order to inspect and perform the necessary repairs.
It’s also important to keep in mind that a water heater leak can be dangerous for your Spring home. It can lead to flooding, rusting, and mildew growth around your house, so it’s important to call in an expert as soon as you spot any signs of a problem. If you need help with your water heater, the experienced plumbers at Beyer Plumbing can assist you.
Faulty Burner
There’s nothing more frustrating than hopping in the shower to take your evening bubble bath only to find that the water is arctic cold. If you are having issues with your gas water heater it could be that the burner isn’t working as it should. The first step is to see if the pilot light is lit. If it isn’t, you can relight it following the directions pasted on your water heater tank. If you do relight it and the flame is still yellow or orange it means that products of combustion are not escaping through the vent system as they should and are instead contaminating your home’s air. This could be a serious safety concern.
Another problem that can cause the burner not to light is a faulty thermocouple. This is something that is going to need to be replaced by a professional as it is a critical safety feature in your water heater. If you do attempt to replace it yourself be sure that the unit is completely cool before touching any of the components. This is a job that you want to leave to the experts at Joe Castro Plumbing.
It is also possible that the flame arrestor has gone bad and is preventing the burner from igniting. This is also a job that should be left to the professionals at Water Heater Repair Spring TX as tampering with this safety device can be very dangerous.
If the breaker was tripped then it’s important to check the fuses in your electrical panel for any problems. This can be done simply by flipping the breaker back on. If the breaker trips again it might be a good idea to call a plumber. A tripped breaker can cause damage to other appliances in your house, so it’s best to let a professional handle this for you. This will ensure that it gets fixed as quickly as possible so you can have hot water again. This is especially important for those who live in a warmer climate, as it can be uncomfortable without access to hot water.
Faulty Heating Element
If the water coming out of your taps is brownish, rusty or has little dark particles in it you likely have a faulty heating element in the tank. This is a common problem that can happen to electric or gas water heaters and will cause you to run out of hot water. The good news is that a professional in hot water tanks will be able to diagnose the problem quickly and will be able to get it fixed for you as soon as possible.
The heating elements are a critical part of your water heater and it’s important that they work properly in order to heat your water. They are located on the bottom of the tank and will only work if there is water in the tank, so if you’re not getting hot water it could be because one or both of the heating elements are broken. To find out if you have a broken heating element, start by testing the electrical connection using a multimeter. If the reading is very low or zero, it means that the element is faulty and needs to be replaced.
Another thing to check is the reset button. This is a safety feature that’s designed to cut off power during an emergency, but sometimes it can flip off for no apparent reason. If you find that the button has popped out, then push it back in and see if this fixes the problem.
If you’re comfortable working on your water heater, then replacing the heating element yourself may be a good option. It’s relatively inexpensive and a very simple process, but you’ll want to be sure that your electrical circuit is completely shut off before beginning. You’ll also need to drain the water heater, empty the old heating element, and flush out any rust or sediment. Once the new heating element is installed, you’ll need to reattach the wires and install the metal cover panel on top of the access door.
Faulty Thermostat
If the thermostat is faulty it won’t open and close when it should and that means the heating element or thermocouple can’t function properly. That will also affect the overall performance of the water heater and lead to less hot water or no hot water at all. It can be difficult to know when the thermostat is faulty and if it is you should contact Water Heater Repair Spring TX right away.
Thermostats can go bad due to contamination of the fluid, a problem with the temperature gauge or just wearing out. Contamination can happen when incompatible coolants are mixed, old coolant isn’t replaced, or particulate matter from gaskets and other parts of the engine break off and get into the thermostat. Thermostats can also wear out if they’re not cleaned regularly and can start to develop cracks.
One of the most common signs that your thermostat is going bad is when the temperature changes suddenly and erratically. This can cause the air to come out of your vents in a completely different temperature than it usually does and can be quite uncomfortable. It can also be dangerous to drive the car with this problem since the temperature gauge will continue to climb higher and risk causing irreparable damage to your engine.
Another sign that your thermostat is going bad is when it won’t stay on the “heat” or “cool” mode. If you flip the switch to heat and the system doesn’t turn on, it may have a broken wiring or thermostat that is stuck in an open position.
A faulty thermostat can also cause your heater to run non-stop. This can be a serious issue and cause your utility bills to skyrocket. A simple test to check this is to change the setting to cool, flip it back to heat and wait for the system to turn on.
Your home’s thermostat is responsible for keeping you comfortable throughout the year and is a vital piece of equipment. Knowing when the thermostat is faulty can help you avoid costly repairs and replace it sooner than necessary.
Joe Castro Plumbing
31519 Boulder Cliff Ln, Spring, TX 77386
Plumber Woodlands
Plumber The Woodlands
Plumbers Spring TX
Plumbers in Spring TX
Plumber Spring TX
The Woodlands Plumber
Woodlands Plumbing
Water heaters are one of the most under-appreciated appliances in your home. They provide you with hot water all day every day and usually need little to no maintenance at all. However, they do break down and need to be repaired from time to time. Here are some signs that you need to call for…